Boonton 52000 Series USB CW Power Sensor - Manual (Page 49)

Boonton 52000 Series
Enhanced Features
This chapter outlines the advanced capabilities of the 52000 series
CW power sensor/meter software.There are brief outlines and
descriptions of how the software can be integrated into other test
environments such as C++, Agilent VEE and National Instruments® NI.
Refer to the programming reference guide for more details . An
electronic version is included on your Boonton CD.
Integrating your power sensor
The following section details how to integrate the Boonton software
into your test environment.
A library of function calls provides a simple, but powerful interface
between your application software and sensor hardware. All the
function calls are contained in a dynamic link library (DLL).
To use the library, the following three files are required:
• USB Sensor Lib.dll
• USB Sensor.Lib.lib
• USB Sensor.h
These files can be found on the installation CD. The latest versions
can be downloaded free of charge from the Boonton website www.
boonton.com