Boonton 52000 Series USB CW Power Sensor - Manual (Page 39)

Boonton 52000 Series
4. Set the plot scaling to Auto.
The Y-axis is automatically scaled to suit the Min and Max values
associated with the level being plotted.
5. (Optional) Disable plot scaling.
The Y-axis uses the entered Min and Max values.
6. Set temperature display, enable the sensor option.
The temperature is displayed with a red trace.
7. (Optional) Enable the Auto Scale option.
The Y-axis is automatically scaled to suit the Min and Max
temperature values. If auto scaling is not selected, then Min and Max
values for the temperature Y-axis can be entered into the Min and
Max boxes.
8. Select Start to begin the real-time trace.
Refer to Figure 34 on page 39.
Figure Typical trace with temperature
While the trace is drawing, the scaling can be altered by selecting
the settings icon or selecting Trace > Settings on the menu bar. Also,
the trace can be stopped by selecting the stop icon or selecting Trace
> Stop on the menu bar. Refer to Figure 35 on page 40.