Boonton 52000 Series USB CW Power Sensor - Manual (Page 41)

Boonton 52000 Series 1
Figure Trace markers
The displayed trace can be saved by selecting the File > Save Trace in
the trace control dialog box. A trace can be recalled by selecting File
> Recall Trace. The raw data used todraw the trace can be saved in a
file by selecting the Save Data icon.
To exit trace mode select the exit icon or select Trace > Exit.
Note Do not select the window close icon at the top right of the
application to exit
the trace feature as this closes the whole application. Instead select
the close icon .