AirSep MN172-1 - Manual (Page 217)

Focus™
EN
AirSep
®
Corporation EN-29
MN172-1 rev. A - 02/13
How to Respond to Focus’s Audible Alarm and
Indicator Lights
Status Audible Alarm Light Indicates Action
Indicator Brief, continuous at
start–up
(Green) and
(Red) alternate;
then (Green)
continuous light Focus has been
turned on. You may begin to
operate your Focus
unit.
Indicator No (Green)
flashes;on each
breath Focus is delivering
oxygen as a pulse
flow. Continue using Focus
normally.
Indicator No (Amber)
continuous light Inspection and/or
Service required. Return unit to
Equipment Provider
for inspection and/or
service.
Battery
Indicator
No 25% (Green)
light; flashes Battery charge is
low. Connect the Focus
unit into a DC outlet
or an AC outlet
immediately. Charge
battery.
Alarm Intermittent:
Beep (Amber) alarm;
intermittent light Warning: Battery
voltage
approaching too
low a level to
continue operating
Focus. Connect the Focus
unit into a DC outlet
or an AC outlet
immediately.
Charge battery.
Alarm Intermittent:
Beep, beep (Amber) alarm;
intermittent light Battery shutdown:
Battery voltage is
too low to operate
Focus. Connect the Focus
unit into a DC outlet
or an AC outlet
immediately.
Charge battery.
Alarm Continuous:
Beep (Amber) alarm;
continuous light No breath detected
by the unit for a
predetermined
time period. Check the cannula
connection. Ensure
that you are breathing
through your nose.
If the alarm persists,
contact your
Equipment Provider.