AirSep MN172-1 - Manual (Page 201)

Focus™
EN
AirSep
®
Corporation EN-13
MN172-1 rev. A - 02/13
10
Figure 4: Bag W/Battery Pockets
Before operating Focus for the first time, familiarize yourself with the major
components. These are illustrated in the Figures on the following pages and
discussed later in the manual.
Connecting to the Focus Power Inlet:
Locate the arrow marking at the top of the connector. Insert connector (Figure 5)
into the Focus power inlet (Figure 6) with the arrow on the side of the connector
facing outward. Do not force the connector into the power inlet, as it can be
inserted only one way. This ensures that neither the unit nor the power
accessories are damaged.
Focus unit’s
power inlet
Figure: 6 Focus unit’s power
connector
Figure: 5