Ag Leader GPS 4100 Operators Manual - Manual (Page 4)

UpDating Operating Program GPS 4100
Ag Leader Technology
March 2001 2
Updating
Operating
Program Your operating program version must be greater than 3.22 (greater than
3.23 for cotton mode) for the PF3000 to use the GPS 4100. The version
of the monitors operating program currently installed is displayed when
you turn on the PF3000.
If your version is before this, contact Ag Leader Technology at 515-232-
5363 to obtain an update. You may also download the update off the Ag
Leader web site at www.agleader.com.
Perform the following steps to install the new operating program:
Step Action
1 Using a computer card reader, copy the file "upgrade.pld" to
the memory card.
2 Insert the memory card in the monitor and turn on the monitor.
3 The monitor will detect a new operating program on the card.
Press the SHOW FILES key. The monitor will display the
version number of the current program and new program.
Press ACCEPT key to install the new version.
4 The monitor will erase the old program and install the new
program.
5 Check some of the field and load information and settings to
double check that the new program is operating correctly