Ag Leader GPS 4100 Operators Manual - Manual (Page 12)

General Instructions GPS 4100
Ag Leader Technology
March 2001 10
SATELLITE DIFFERENTIAL SETUP
Omnistar Satellite Beacon Frequencies:
Eastern USA 1556.825
Central USA 1554.497
Western USA (1) 1551.429
Western USA (2) 1551.489
Australia 1558.510
Europe 1531.230
South America (1) 1541.705
South America (2) 1541.715
Custom (1) 0000.0
Custom (2) 0000.0
EDIT
EDIT
NAME
EDIT
VALUE
EXIT
Figure 8. Custom Frequency Screen
If you will
be using…
Then…
Omnistar Before contacting Omnistar you must have the Receiver
Serial Number (Found on the Add-On GPS Diagnostic
screen – Press DIAG key, GPS key, Add-On GPS key) and
the Provider User Code (this value will appear on screen
shown on Figure 6 when Differential Provider is set to
Omnistar). Call the Omnistar subscription number (1-888-
666-4782 in the USA) and give them these two numbers.
Omnistar will then give you a 24-digit code. Key the code
into the right of Omnistar Code (See Figure 8) using up
and down arrow keys. Once the code is entered, press
ACCEPT key to send the code to the unit. Now press
EXIT key to return to GPS SETUP screen, press exit key
to return to operating screen. After 30 minutes, the
receiver should start receiving corrections and display a
"D" in the upper right hand corner of the PF3000.