HP Designjet Z3100 Photo Printer series - Manual (Page 54)

NOTE Shortcuts are available only under Windows.
You can see a list of available shortcuts; select the one that matches the kind of job you want to print.
The driver options are now adjusted to suit your job. You can either print immediately, or examine the
settings to check that you agree with them. If you like, you can select a shortcut and then change some
of its settings manually.
Tip Check at least the settings that you can see in the Printing Shortcuts tab: the document
size, orientation, etc.
The Factory Defaults shortcut contains the printer's default settings. When you click on it, it sets all
options to their default values.
Printing shortcuts can be customized to your particular needs. To create your own shortcut:
1. Select the shortcut that comes closest to satisfying your requirements.
2. Change any value in the Printing Shortcuts tab and/or other tabs.
3. Save the new printing shortcut.
If you decide later that you no longer want a shortcut, you can delete it.
Rescale a print
You can send an image to the printer at a certain size but tell the printer to rescale it to a different size
(normally larger). This may be useful:
● If your software does not support large formats
● If your file is too large for the printer's memory—in this case, if you have the HP-GL/2 Upgrade,
you can reduce the paper size in your software and then scale it up again using the front-panel
option
44 Chapter 5 Printing ENWW
Prin
tin
g