HP Designjet Z3100 Photo Printer series User Manual

Page 103

Text mode
Original mode

Push down as indicated by the arrow shown below.

CAUTION

When installing the new printhead there may be some resistance, so you need

to press it down firmly but smoothly. You should hear a beep and see confirmation on the
front-panel display that the printhead has been inserted. If you have difficulty, see

Cannot

insert a printhead on page 144

Insert any other printheads, that need to be installed, with the same procedure, then close the
carriage lid.

Ensure the end of the blue handle catches the wire loop on the near side of the carriage.

ENWW

Insert a printhead

Hand

lin

ink cartrid

ges

and

rin

eads