Physical specifications, Memory specifications, Power specifications – HP Designjet Z3100 Photo Printer series User Manual
Page 179: Ecological specifications, Prin ter specifications
17 mm = 0.67 inches (sheet)
Table 17-5
Mechanical accuracy
±0.2% of the specified vector length or ±0.1 mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0
printing material in Best or Normal mode with HP Matte Film roll feed.
Table 17-6
Graphic languages supported
HP Designjet Z3100 Photo Printer Series standard
HP-PCL3 GUI
HP Designjet Z3100 Photo Printer Series with HP-GL/2
upgrade
HP-GL/2 RTL
Physical specifications
Table 17-7
Printer physical specifications
24 inch printer
24 inch printer (without stand) 44 inch printer
Weight
143 lb (65 kg)
103.6 lb (47 kg)
189 lb (86 kg)
Width
49.7 inches (1262 mm)
49.7 inches (1262 mm)
69.7 inches (1770 mm)
Depth
Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Height
41.2 inches (1047 mm)
15.4 inches (391 mm)
41.2 inches (1047 mm)
Memory specifications
Table 17-8
Memory specifications
Memory (DRAM) supplied
128 MB
Hard disk
40 GB
Power specifications
Table 17-9
Printer power specifications
Source
100–240 V ac ±10%, auto-ranging
Frequency
50–60 Hz
Current
< 2 A
Consumption
< 200 W
Ecological specifications
For the up-to-date ecological specifications of your printer, please go to
and search
for “ecological specifications”.
ENWW
Physical specifications 169
Prin
ter specifications