HP XP P9500 Storage - Manual (Page 82)

Table 32 RAID Manager error codes for Continuous Access Synchronous (SSB1 is
B901/B90A/B90B/B912/D004) (continued)
Description Error code
(SSB2)
In a Pairresync operation, all difference setting was abnormally terminated. CB21
When connected to the old model, LUSE pairs with different amounts of capacity cannot be created. CB5E
If the path is set between CUs LUSE pairs with different CUs cannot be created. CB5F
Continuous Access Synchronous is not installed in the secondary system. CB60
One DKC cannot include a pair using Escon and a pair using Fibre. CB62
The Paircreate operation cannot be executed because the P-VOL is an external storage system volume. CB6E
The Paircreate operation cannot be executed because the S-VOL is an external storage system volume. CB6F
The Paircreate operation cannot be executed because the P-VOL is an external storage system migration
volume. CB71
The Paircreate operation cannot be executed because the S-VOL is an external storage system migration
volume. CB73
The device is not recognized correctly. CB75
The Paircreate operation cannot be executed because the paths are specified per storage system. CB76
The used capacity of the Data Retention program product on the secondary system exceeds the license
capacity. CB77
The Paircreate operation cannot be executed because the specified S-VOL is defined as the command device. CB78
A request for a Paircreate operation was received. The command was rejected because the specified S-VOL
belongs to a different CLPR than the registered consistency group’s CLPR. CB7E
The Paircreate operation cannot be executed because the P-VOL LUN is a LUSE volume created across
multiple CLPRs. CBD0
The Paircreate operation cannot be executed because the S-VOL LUN of S-VOL is a LUSE volume created
across multiple CLPRs. CBD1
A copy pair cannot be created because the specified P-VOL is not the P-VOL of Continuous Access Journal. CBD8
The Paircreate operation cannot be executed because the used capacity of the Data Retention on the
secondary system exceeds the license capacity. CBDA
A request for a Paircreate operation was received in the Continuous Access Synchronous-Continuous Access
Journal combination status. However, the command was rejected because the Mirror ID of Continuous Access
Journal was 0. CBDC
In configuring the Continuous Access Synchronous-Continuous Access Journal multitarget, a request for a
Continuous Access Synchronous Paircreate operation was received. The command was rejected because
the Continuous Access Journal pair was in the process of copying. CBDD
The Paircreate operation cannot be executed because the P-VOL is used by Snapshot. CBDE
The Paircreate operation cannot be executed because the S-VOL is used by Snapshot. CBDF
The Paircreate operation cannot be executed because the P-VOL is a Snapshot virtual volume. CBE0
The Paircreate operation cannot be executed because the S-VOL is a Snapshot virtual volume. CBE1
The Paircreate operation cannot be executed because the P-VOL is a Thin Provisioning Pool-VOL. CBE2
The Paircreate operation cannot be executed because the S-VOL is a Thin Provisioning Pool-VOL. CBE3
More than 32,768 pairs cannot be created in one storage system. CBE7
82 Troubleshooting