HP XP P9500 Storage - Manual (Page 81)

Table 32 RAID Manager error codes for Continuous Access Synchronous (SSB1 is
B901/B90A/B90B/B912/D004) (continued)
Description Error code
(SSB2)
The number of paths is smaller than the required minimum number of paths. C3B1
The True Copy P-VOL is a Business Copy volume. C3B6
The True Copy S-VOL is a Business Copy volume. C3B7
A request for a Paircreate operation was received. The command was rejected because of one of the
following reasons: C3BA
The secondary system’s SSID or CU number is not supported.
The secondary system’s SSID or CU number is supported, the microcode of the main system device does
not support them.
These volumes cannot be specified as a Continuous Access Synchronous S-VOL: C3BE
•
Business Copy S-VOL not in PSUS status
• Business Copy Reserved volume
•
Business Copy P-VOL in the process of reverse copy
A Continuous Access Synchronous S-VOL cannot be specified as a Business Copy S-VOL, Business Copy
Reserved volume, or a Business Copy P-VOL in the process of reverse copy. C3BF
A request for a Paircreate operation was received. The command was rejected because the specified volume
was already part of a Continuous Access Synchronous or Continuous Access Journal pair (including journal
volumes). C3C7
The S-VOL is reserved. Or a secondary system, S-VOL, or the path between primary system and secondary
system is in the BUSY status. C3CA
The Continuous Access Synchronous S-VOL is a Business Copy volume. C3CD
The DKC type of the secondary system is not supported by Continuous Access Synchronous. C3D2
The SSID or CU number of the specified secondary system is invalid. C3D3
The specified S-VOL is unavailable because the connecting port cannot recognize it. C3D6
The pair status of the S-VOL is invalid. C3D7
The pair cannot be created if the Continuous Access Synchronous S-VOL corresponds to any of the following: C3D9
• The volume is a V-VOL; the pair using the volume is a Business Copy or Snapshot pair, or an Auto LUN
reserve volume.
•
The volume is a V-VOL and an addition to volume capacity is in progress, or pages are being released.
• The capacity of the volume is different from the capacity of the P-VOL
•
The volume is initialized by Business Copy
S-VOL pair status is not PSUS or PSUE. C3DB
Continuous Access Synchronous Z, Continuous Access Synchronous, and Continuous Access Journal cannot
be mixed in the consistency group. CB12
The secondary system consistency group cannot be deleted because the Takeover command reversing
operations between the P-VOL and S-VOL failed. CB19
The secondary system consistency group was abnormally terminated because the Takeover command
reversing operations between the P-VOL and S-VOL failed. CB1A
No dummy volume can be created in the S-VOL. CB1D
The secondary system does not support Continuous Access Synchronous. CB1F
In referring to the function bit, the system information reference was abnormally terminated. CB20
Troubleshooting using RAID Manager 81