HP Officejet Pro 8610 e-All-in-One Printer - Manual (Page 43)

Load an original on the scanner glass
You can copy, scan, or fax originals by loading them on the scanner glass.
NOTE: Many of the special features do not work correctly if the scanner glass and lid backing are
not clean. For more information, see Maintain the printer on page 34.
NOTE: Remove all originals from the document feeder tray before lifting the lid on the printer.
To load an original on the scanner glass
Use these steps to load an original on the scanner glass.
1. Lift the scanner lid.
2. Load your original print-side down near to the engaved guides along the scanner glass edge as
shown in the following illustration.
NOTE: If you are using the scanner glass, ensure that the automatic document feeder is
empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the
scanner glass.
3. Close the lid.
ENWW Load an original on the scanner glass 27