HP Officejet Pro 8610 e-All-in-One Printer - Manual (Page 124)

To change from a USB connection to a wireless network (OS X)
1. Connect the printer to your wireless network.
2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to wireless for this printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test
report provides information about the printer status, hardware (MAC) address, and IP address. If the
printer is connected to a network, the test report displays details about the network settings.
To print the wireless test report
1. From the printer control panel, touch (Wireless), and then touch Settings.
2. Touch Print Reports
3. Touch Print Wireless Test Report.
Turn on or off the wireless capability of the printer
The wireless capability of the printer is on by default, as indicated by the blue Wireless light on the
printer control panel. If the wireless light is blinking, wireless enable (wireless radio on) but you do not
have a wireless connection. If the wireless light is on solid blue, the printer has an active connection
to a wireless network.
If your printer is connected using an Ethernet, the wireless capability is not used, in this case you
might want to turn off the printer wireless capability.
NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless capability
and the Wireless light also goes off.
1. From the printer control panel, touch and slide your finger across the screen, touch Setup, and
then touch Network Setup.
2. Touch Wireless Settings.
3. Touch Wireless to turn on or turn off the radio.
108 Chapter 8 Network setup ENWW