HP XP P9500 Storage - Manual (Page 64)

Table 20 RAID Manager Error Codes (continued)
Description SSB2 code
The pair operation was rejected because the volume specified as the primary volume was being
formatted. 2372
The pair operation was rejected because the volume specified as the primary volume was a command
device. 2373
The pair operation was rejected for one of the following reasons: 2380
•
The volume specified as the secondary volume was not mounted
•
The MU number was 3 or more
The pair operation was rejected because the volume specified as the secondary volume was blocked
or a system disk. 2381
The pair operation was rejected because the volume specified as the secondary volume was being
formatted. 2382
The pair operation was rejected because the volume specified as the secondary volume was a command
device. 2383
The pair operation was rejected because the volume specified as the primary volume was a reserved
volume for Auto LUN. 2385
The pair operation was rejected because the volume specified as the secondary volume was a reserved
volume for Auto LUN. 2386
The create pair operation was rejected because the volume specified as the primary volume was the
volume for Auto LUN. 2387
The registering of the pair in the consistency group was rejected because the number of the pairs in
a consistency group exceeded the definable maximum number of pairs. 2394
The pair operation was rejected because the pair sharing the specified volume as the primary volume
was undergoing the reverse copy operation or the quick restore operation. 2395
The pair operation was rejected because the L1 pair sharing the specified primary volume as the root
volume was undergoing the reverse copy operation or the quick restore operation. 2396
The pair operation was rejected because the L2 pair sharing the specified primary or secondary
volume as the node volume was undergoing the reverse copy operation or the quick restore operation. 2397
The quick restore or reverse copy operation was rejected because the status of the specified pair was
not PSUS or PSUE. 2398
The quick restore or reverse copy operation was rejected because some of the pairs sharing the
specified volume as the primary volume were not in PSUS or PSUE status. 2399
The quick restore or reverse copy operation was rejected because the volume specified as the volume
was specified as the primary volume for XRC. 23A8
The quick restore or reverse copy operation was rejected because the volume specified as the volume
was specified as the primary volume for CC. 23A9
The pair operation was rejected because the volume specified as the secondary volume was specified
as the primary volume for XRC. 23AA
The pair operation was rejected because the volume specified as the secondary volume was specified
as the primary volume for CC. 23AB
Registering the pair in the consistency group from RAID Manager was rejected because the specified
consistency group number was reserved by PPRC/Business Continuity Manager. 23AF
The create pair operation was rejected because the volume specified as the secondary volume could
not be used as the secondary volume because of Volume Security settings. 23BB
The pair operation was rejected because the split time for the consistency group was set. 23f5
The pair operation was rejected because the specified volume did not exist. B911
64 Troubleshooting