HP XP P9500 Storage User Manual

Page 60

Table 20 RAID Manager Error Codes (continued)

Description

SSB2 code

The quick restore operation was rejected because of one of the following:

2097

•

The primary volume was also a Thin Provisioning V-VOL, but the secondary volume was a normal
volume.

•

The primary volume was a normal volume, but the secondary volume also a Thin Provisioning
V-VOL.

The quick restore operation was rejected because the emulation type of only one of the volumes in
the pair was OPEN-0V.

209b

The quick restore operation was rejected because the updated information about storage system
configuration was being backed up.

209c

The pair operation was rejected because the volume specified as the primary volume was a Mainframe
Fibre Data Migration volume.

209e

The specified pairs contain the Cnt Ac-S asynchronous volumes. The quick restore operation was
rejected because the CLPRs of the primary and secondary volumes of the specified pair were different.

20a0

The create pair operation was rejected because the primary volume was a Thin Provisioning or Smart
Tiers V-VOL whose capacity was increasing.

20a2

The create pair operation was rejected because the secondary volume was a Thin Provisioning or
Smart Tiers V-VOL whose capacity was increasing.

20a3

The pair operation was rejected because the specified consistency group number was being used by
Snapshot.

20a9

The pair operation was rejected because the volume specified as the primary volume was a Thin
Provisioning or Smart Tiers V-VOL and its zero pages were being reclaimed.

20aa

The pair operation was rejected because the volume specified as the secondary volume was a Thin
Provisioning or Smart Tiers V-VOL and its zero pages were being reclaimed.

20ab

The pair operation was rejected because the volume specified as the primary volume was a Thin
Provisioning or Smart Tiers V-VOL and its capacity was increasing.

20b0

The pair operation was rejected because the volume specified as the secondary volume was a Thin
Provisioning or Smart Tiers V-VOL and its capacity was increasing.

20b1

The pair operation was rejected because the volume specified as the primary volume was a Thin
Provisioning or Smart Tiers V-VOL, which was not associated with a pool.

20b4

The pair operation was rejected because the volume specified as the secondary volume was a Thin
Provisioning or Smart Tiers V-VOL, which was not associated with a pool.

20b5

The pair operation was rejected because no LU path was defined to the volume specified as primary
volume.

20b7

The pair operation was rejected because no LU path was defined to the volume specified as secondary
volume.

20b8

The primary volume rejected the paircreate operation because the THP pool is initializing in the Thin
Provisioning or Smart Tiers V-VOL.

20d0

The secondary volume rejected the paircreate operation because the THP pool is initializing in the
Thin Provisioning or Smart Tiers V-VOL.

20d1

The pair operation was rejected because the volume specified as the primary volume is an external
volume that is mapped for online data migration.

20de

The pair operation was rejected because the volume specified as the primary volume was a secondary
volume for an existing pair, and the volume specified as the secondary volume was the primary volume
for another existing pair.

20e9

The pair operation was rejected because the volume specified as the secondary volume is an external
volume that is mapped for online data migration.

20df

Troubleshooting