HP XP P9500 Storage - Manual (Page 51)

RAID Manager pair status name Remote Web Console pair status name
PSUS PSUS(SP)/PSUS
Primary volume - PSUS PSUS
Secondary volume - SSUS
COPY COPY(RS)/COPY
RCPY COPY(RS-R)/RCPY
PSUE PSUE
Status, pair operations permitted
A pair’s status shows whether a desired operation can be performed. Each operation requires a
specific status, or is permitted for multiple possible statuses.
Supported operations and statuses are shown in the following tables.
Pair operation Pair Status
Delete pairs Suspend pairs Resync pairs
(reverse) Resync pairs
(forward) Split pairs Create pairs
N O NO NO NO NO NO SMPL(PD)
YES YES NO NO YES YES COPY(PD)/COPY
YES YES NO NO YES YES PAIR
YES YES NO NO NO YES COPY(SP)/COPY
NO YES NO YES NO YES PSUS(SP)/PSUS
YES YES YES YES NO YES PSUS
YES YES NO NO NO YES COPY(RS)/COPY
YES YES NO NO NO YES COPY(RS-R)/RCPY
YES NO NO YES NO YES PSUE
Related information
•
“Status for L1, L2 pairs and operations permitted ” (page 51)
•
“Status of unaffected S-VOLs, operations permitted ” (page 53)
Status for L1, L2 pairs and operations permitted
When you have cascaded pairs, the operations that can be performed depend on pair status for
both layers. The ability to perform an operation depends on the following:
•
To perform an L1 operations, the status of the L2 pair
•
To perform an L2 operations, the status of the L1 pair
•
Supported read/write on L1 and L2 S-VOLs
Supported operations and statuses are shown in the following tables.
Monitoring the system 51