Reviewing s-vol path information – HP XP P9500 Storage User Manual
Page 116
3.
From the volume list, select and right-click the volume or pair whose information you want to
see, then select Detail from the menu. The Detail dialog box displays. Field descriptions are
provided below.
Description
Field
Volume ID: Displays LUN information using LDKC number:CU number:LDEV number format.
P-VOL Information
CLPR: Displays CLPR number:CLPR name.
Displays the volume’s emulation type, capacity, and number of blocks.
Volume Information
Pair Information
•
P-VOL: Displays LUN information using LDKC number:CU number:LDEV number format.
•
S-VOL: Displays LUN information using LDKC number:CU number:LDEV number format.
•
MU: The pair’s MU number (mirror unit number).
•
Status: The status of the pair.
•
Sync: Percentage that P-VOL and S-VOL are synchronized.
•
CTG: The consistency group number displays if the pair is registered in the group. If the
pair is not registered to the consistency group, --- displays.
•
CLPR(P): The identifier for the P-VOL’s cache logical partition (CLPR) displays in CLPR
number:CLPR name format.
•
CLPR(S): The identifier for the S-VOL’s cache logical partition (CLPR) displays in CLPR
number:CLPR name format.
•
SvolMode: Indicates whether the S-VOL has been written to and whether it can be read.
See
for more information about Svol Mode.
•
Copy Pace: Indicates the speed that data is copied according to the pair status. See
for more information about Copy Pace.
If you select the check box, the information displayed in the Pair Operation window is updated
after the Detail dialog box closes. If you do not select the check box, the information in the
Pair Operation window is the same before and after you close the Detail dialog box.
Refresh the window
after this dialog box is
closed.
Reviewing S-VOL path information
You can view path information for the S-VOL. You do this in the S-VOL Path dialog box.
Procedure 19 To view S-VOL path information
1.
In Remote Web Console, click Actions > Local Replications > BC/SS > Pair Operation.
2.
In the tree, select the appropriate port or host group for the desired pairs. Related volumes
display.
116
Monitoring and maintaining the system (secondary window)