HP XP P9500 Storage - Manual (Page 61)

Table 20 RAID Manager Error Codes (continued)
Description SSB2 code
The pair operation was rejected because the volume specified as the primary volume was a Compatible
FlashCopy secondary volume. 22f6
The pair operation was rejected because the volume specified as the secondary volume was a
Compatible FlashCopy primary or secondary volume. 22f7
The quick restore or the reverse copy operation was rejected because the volume specified as the
secondary volume was a Compatible FlashCopy primary or secondary volume. 22f9
The pair operation was rejected because shared memory is not allocated or BC is not installed. 2301
The pair operation was rejected because the volume specified as the primary or secondary volume
was not the top volume of the LUSE volume. 2302
The pair operation was rejected because the LBA size of the specified primary volume was not the
same as the size of the specified secondary volume. 2306
The create pair operation was rejected because the number of pairs exceeded the maximum number
of pairs. 2309
The create pair operation was rejected because the volume specified as the secondary volume was
the primary volume of the BC pair whose MU number is 0. 230A
The pair operation was rejected because the pair was being suspended or deleted. 230B
One of the following occurred: 2310
• Pair creation was rejected the specified consistency group number had already been used for L1
pair.
•
Pair creation was rejected the specified consistency group number had already been used for L2
pair.
• Pair creation was rejected the volume specified as the primary volume was the secondary volume
of the pair which was being split by quick split.
•
The quick restore operation was rejected because the VLL setting of the primary volume was different
from that of the secondary volume.
•
The pair operation was rejected because the specified primary and secondary volumes were a
FlashCopy pair.
•
The quick restore or reverse copy operation was rejected because the pair status of the specified
primary and secondary volumes was PSUE.
•
The quick restore or reverse copy operation was rejected because the specified primary volume
and the secondary volume was the L2 pair.
•
The consistency group split operation on a consistency group was rejected because some of the
pairs in the consistency group were being resynchronized, split, or were already suspended.
•
The pair operation was rejected because the pair status of the primary volume, the secondary
volume, or both showed that the pair could not receive the issued command.
The pair operation was rejected because the volume specified as the secondary volume was online
to the host. 2312
The create pair operation was rejected because the volume specified as the secondary volume was
the secondary volume of another pair whose pair status was PSUS. 2314
The quick restore or reverse copy operation was rejected because the primary volume of the specified
pair was online to the host. 231F
The pair operation was rejected because the necessary shared memory was not installed, or
initialization was not completed. 2322
The pair operation was rejected because the number of slots of the volume specified as the primary
volume exceeded the upper limit. 2324
The pair operation was rejected because the number of slots of the volume specified as the secondary
volume exceeded the upper limit. 2325
Troubleshooting with RAID Manager 61