HP Officejet 4314 All-in-One Printer - Manual (Page 75)

3. Clean the glass strip with a soft cloth or sponge slightly moistened with a
nonabrasive glass cleaner.
Caution Do not use abrasives, acetone, benzene, or carbon
tetrachloride on the glass, since they can damage it. Do not place or spray
liquid directly on the glass. The liquid might seep under the glass and
damage the device.
4. Close the automatic document feeder cover.
5. Plug in the power cord, and then turn on the HP All-in-One.
Caution Make sure you close the automatic document feeder cover before
loading any paper or originals. If you do not close the cover, you might
damage the mechanism.
Clean the white strip
Minor debris can accumulate on the white strip located inside the automatic document
feeder.
To clean the white strip
1.
Turn off the HP All-in-One, and unplug the power cord.
Note Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later,
when you plug the power cord back in.
2. Lift the cover of the automatic document feeder.
Chapter 9
72 HP Officejet 4300 All-in-One series
Maintain the
HP All-in-One