HP Officejet 4314 All-in-One Printer - Manual (Page 66)

3. Press until On-Forward or On-Print & Forward appears, and then press OK .
– Choose On-Forward if you want to forward the fax to another number
without printing a backup copy on the HP All-in-One.
Note If the HP All-in-One is not able to forward the fax to the
designated fax machine (if it is not turned on, for example), the HP All-
in-One will print the fax. If you set up the HP All-in-One to print error
reports for received faxes, it will also print an error report.
– Choose On-Print & Forward to print a backup copy of your received fax on
the HP All-in-One while forwarding the fax to another number.
4. At the prompt, enter the number of the fax machine that will receive the forwarded
faxes.
5. At the prompt, enter a start time and date and a stop time and date.
6. Press OK .
Fax Forwarding appears on the display.
If the HP All-in-One loses power when Fax Forwarding is set up, the HP All-in-
One saves the Fax Forwarding setting and phone number. When power is
restored to the device, the Fax Forwarding setting is still On .
Note You can cancel fax forwarding by pressing Cancel on the control
panel when the Fax Forwarding message is visible on the display, or you
can select Off from the Fax Forwarding Black Only menu.
Block junk fax numbers
If you subscribe to a caller ID service through your phone provider, you can block
specific fax numbers, so the HP All-in-One does not print faxes received from those
numbers in the future. When an incoming fax call is received, the HP All-in-One
compares the number to the list of junk fax numbers you set up to determine if the call
should be blocked. If the number matches a number in the blocked fax numbers list,
the fax is not printed. (The maximum number of fax numbers you can block varies by
model.)
●
Set the junk fax mode
● Add numbers to the junk fax list
● Remove numbers from the junk fax list
Note This feature is not supported in all countries/regions. If it is not
supported in your country/region, Junk Fax Blocker Set Up does not appear
in the Basic Fax Setup menu.
Set the junk fax mode
By default,
Block Junk Fax mode is turned On . If you do not subscribe to a caller ID
service through your phone provider, or do not want to use this feature, you can turn
off this setting.
To set the junk fax mode
1.
Press Setup .
2. Press 4 , and then press 6 .
User Guide 63
Fax