HP Officejet 4314 All-in-One Printer - Manual (Page 69)

Tip If you choose On Fax Send or Send & Receive , and scan your fax
to send from memory, you can include an image of the first page of the fax
on the
Fax Sent Confirmation report. Press Setup , press 2 , and then
press 2 again. Select On from the Image on Fax Send Report menu.
Print fax error reports
You can configure the HP All-in-One so that it automatically prints a report when there
is an error during transmission or reception.
To set the HP All-in-One to print fax error reports automatically
1.
Press Setup .
2. Press 2 , and then press 3 .
This selects Print Report and then selects Fax Error Report .
3. Press to select one of the following, and then press OK .
Send &
Receive Prints whenever there is any kind of fax error. This is the
default setting.
Off Does not print any fax error reports.
On Fax Send Prints whenever there is a transmission error.
On Fax Receive Prints whenever there is a receiving error.
Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing from the control panel
➔ Press
Cancel on the control panel to stop a fax you are sending or receiving. If
the HP All-in-One does not stop faxing, press Cancel again.
The HP All-in-One prints any pages it has already started printing and then
cancels the remainder of the fax. This can take a few moments.
To cancel a number you are dialing
➔ Press
Cancel to cancel a number you are currently dialing.
Chapter 6
66 HP Officejet 4300 All-in-One series
Fax