Fax setup, Set up the hp all-in-one for faxing – HP Officejet 4314 All-in-One Printer User Manual
Page 25
b.
In the
Internet & Network
area, click
Sharing
.
c.
From the
Services
tab, click
Printer Sharing
.
2.
On the host computer, do the following:
a.
Click
System Preferences
in the Dock, or, from the
Apple
menu, choose
System Preferences
.
The
System Preferences
dialog appears.
b.
In the
Hardware
area, click
Print & Fax
.
c.
Do one of the following, depending on your OS:
•
(OS 10.2.8 or 10.3.x) From the
Printing
tab, click the check box to
Share my printers with other computers
.
•
(OS 10.4.x) Click
Sharing
, click the check box to
Share this printer
with other computers
, and then select the printer to share.
Fax setup
After completing all the steps in the Setup Guide, use the instructions in this section to
complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up the HP All-in-One so that faxing works
successfully with equipment and services you might already have on the same phone
line as the HP All-in-One.
●
Set up the HP All-in-One for faxing
●
Change settings on the HP All-in-One to receive faxes
●
●
Set up the HP All-in-One for faxing
Before you begin setting up the HP All-in-One for faxing, determine which kind of
phone system your country/region uses. The instructions for setting up the HP All-in-
One for faxing differ depending on whether you have a serial- or parallel-type phone
system.
●
If you do not see your country/region listed in the table below, you probably have
a serial-type phone system. In a serial-type phone system, the connector type on
your shared telephone equipment (modems, phones, and answering machines)
does not allow a physical connection to the "2-EXT" port on the HP All-in-One.
Instead, all equipment must be connected at the telephone wall jack.
Note
In some countries/regions that use serial-type phone systems, the
phone cord that came with the HP All-in-One might have an additional wall
plug attached to it. This enables you to connect other telecom devices to
the wall jack where you plug in the HP All-in-One.
●
If your country/region is listed in the table below, you probably have a parallel-
type telephone system. In a parallel-type phone system, you are able to connect
shared telephone equipment to the phone line by using the "2-EXT" port on the
back of the HP All-in-One.
Chapter 3
22
HP Officejet 4300 All-in-One series
Finish
setup