HP 6Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 74)

=> switch loc=local flash file=filename.img
3. When the update is complete, reset the switch. Recommended procedures vary for
single-domain and dual-domain environments. For information on resetting switches, see
“Resetting the VSM software, the switch or attached storage enclosures” (page 76) .
Example 3: This example demonstrates updating firmware on both switches at the same time.
1. From the VSM CLI prompt, enter the following command to locate the file on the FTP server
and flash the firmware onto the switch:
=> switch all flash file=ftp://X.X.X.X/filename.img
2. When the update is complete, reset the switch. Recommended procedures vary for
single-domain and dual-domain environments. For information on resetting switches, see
“Resetting the VSM software, the switch or attached storage enclosures” (page 76) .
74 Performing common tasks