HP 6Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 34)

•
Blue=Selected—Selected in this session or already a member of this zone
group.
•
Gray=Not Selectable—Assigned to a different zone group or attached to
storage enclosures without port-based zoning capabilities. Can not be
selected.
Helpful hints:
•
To expand or contract the display for each storage enclosure, click the arrow at the far right
of the display.
•
In addition to the mouse, the tab, arrow keys, and space bar can be used to select or clear
drives from the zone group.
•
Information about the drive bay is shown in the display. For example, if the bay is populated
with a disk drive, information about the disk drive type is presented.
•
Empty drive bays can be assigned to a zone group. This allows you to set up zone groups
for the storage enclosures and populate the bays with disk drives at a later time.
•
A drive bay can belong to only one zone group.
•
When selecting drive bays to be included in a zone group, consider your plans for creating
logical units (LUNs) from those drives.
•
The following words may be displayed in the navigation tree by the zone group:
◦ Pending Save—until the configuration is saved.
◦ Unassigned—until a server device bay is granted access to the zone group.
34 Tasks in the VSM Zoning tab