HP 6Gb SAS Switch for HP BladeSystem c-Class User Manual
Page 70
Success
This example shows how to assign the zone group, zone5, created in
to BladeSystem device server bay 5.
=> switch loc=local startupdate
Success
=> bladeport id=5 add zg=zone5
Success
=> switch loc=local saveupdate
Success
3.
[Optional] Verify that the zone group was assigned as intended.
For example, use one of the following commands:
=> bladeport all show detail
=> switch loc=local zg all show detail
This example shows that zone group “Ports_1” created in
“Creating a switch-port zone group”
is now assigned to BladeSystem server device bay 1, and “zone5”, created in
“Creating a drive-bay zone group” (page 67)
is now assigned to BladeSystem server device
bay 5
=> switch loc=local zg all show detail
Blade Enclosure At BottomC7000
Switch: Local (VSM Active)
Zone Group: Ports_1 (Assigned, Offline)
Zoned Blade Switch Port: 54
Zoned Blade Switch Port: 64
Assigned Blade Port: 1
Server Connection Status: Offline
Storage Connection Status: Online
Overall Status: OK
Zone Group: zone5 (Assigned, Offline)
Connected Expander: Expander 1
Zoned Storage Enclosure Bay: 51:1:29 - Occupied
Zoned Storage Enclosure Bay: 51:1:30 - Occupied
Zoned Storage Enclosure Bay: 51:1:31 - Empty
Zoned Storage Enclosure Bay: 51:1:32 - Empty
Zoned Storage Enclosure Bay: 51:1:33 - Occupied
Zoned Storage Enclosure Bay: 51:1:34 - Occupied
Zoned Storage Enclosure Bay: 51:1:35 - Occupied
Assigned Blade Port: 5
Server Connection Status: Offline
Storage Connection Status: Online
Overall Status: Offline
70
Performing common tasks