HP 6Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 57)

Command description Command syntax
Replicate zoning configuration settings from an old, failed external SAS storage
enclosure onto its newly-connected replacement. replicate
Update system status. rescan
Restart the switch VSM software. This command is used after flashing firmware (on
switches or attached storage enclosures) or updating network settings. reset
Retry the saveupdate command. retrysave
Process (commit) all commands entered since the last startupdate command. saveupdate
Display available keyword abbreviations. shorthand
Display detailed information about a configuration element or all configuration
elements in a table. show
Display advanced settings, such as the multi-initiator mode. showadvance
Display current network settings. shownetwork
Display current SNMP settings. showsnmp
Displays the system log. showsyslog
Update SNMP settings. snmp
Split ports on the 6Gb SAS BL Switch into multiple sub-ports. split
Initialize the execution process for transaction-based commands. startupdate
Generate a test SNMP trap. testtrap
Create a zip file with a summary log of events for the switch. vsmeventlog
For more information about the syntax or how to use these commands, use the VSM CLI help
command. For more information about the help command,
“The help command” (page 59) .
Parameter overview
Most commands require a parameter to clarify the action. Some parameters are optional and, if
not entered for a command, the default value is used.
The specific parameters and values that are valid for a given command depend on the target to
which you apply the command. To determine the valid parameters for a particular command, use
the help command. For more information about the help command, see
“The help command”
(page 59) .
Command syntax 57