HP Hub & Switch Management for OV-UX - Manual (Page 82)

10-10
HP Hub & Switch Management Admin
HP Admin Parameters
H
P
H
u
b & S
w
it
ch
M
a
nagemen
t A
d
mi
n
Printer Configuration Parameters
Network management applications that implement printer support on X
Window systems can use the Print Configuration dialog box to configure
printer configuration parameters.
Figure 10-2. Printer Configuration
Table 10-4. Printer Configuration Parameters
Parameter Description
Default Printer Displays the current default printer name. This printer will be used if
the choice of printers is not overridden.
Installed Printers Provides a sorted list of all currently configured printers. The
currently displayed printer updates the “lp command” and “Output
Format” boxes.
lp command Shows the device name and port for the currently selected printer,
and the lp command string. The lp command is used to redirect the
output to a specific device—printed output is “piped” into the
command specified by the lp command text. Your can modify the lp
command string to meet your printer requirements. See your HP-UX
man pages for more information on the lp command.
Output Format Identifies the driver type of the printer that is currently selected. The
lp command string must be compatible with the format identified in
this box. You may need to edit the lp command string or choose
another printer.