beautypg.com

Disable port, Set security policy for selected ports, Disable port -6 – HP Hub & Switch Management for OV-UX User Manual

Page 70: Set security policy for selected port, Setting security policy

background image

8-6

Setting Up Security for a Device
Set Security Policy for Selected Ports

S

e

tt

ing

U

p

S

ecuri

ty

f

o

r

a

De

vi

c

e

Note: In order for traps to function, you must also set the trap in the
Thresholds dialog box, as follows:

1.

Using the right mouse button, click on the device symbol in the HP
Network Node Manager map.

2.

Select SNMP Configuration.

3.

Select the Thresholds tab and set the thresholds for the traps you are
interested in receiving.

4.

Select the Trap Receivers tab and set the management stations that can
capture traps.

5.

Select the Authorized Managers tab and set the management stations that
can send and receive SNMP requests for the device.

Disable Port

If the Disable Port parameter displays “yes”, the port may be disabled when
an unrecognized address is received. Disabling the port depends on the
Address Selection parameter that you have chosen. The settings First Heard
and Assigned will disable the port if a new address is heard on that port. The
port will not be disabled when a new address is learned if the setting is
Continuous.

Set Security Policy for Selected Ports

You can set the security policy port by port, or by selecting a group of ports.
Select one port by clicking on the entry in the Port Security page. To select
more than one port, you can Ctrl-click on each port you want to include, or
to select a range of contiguous ports, click on the first port in the range, then
shift-click on the last port to be included. Click the Set Security Policy for
Selected Ports
button. Select the parameters that you want to assign.