HP XP20000XP24000 Disk Array - Manual (Page 86)

1. Log in to Remote Web Console, and open the Account window (see Figure 28 on page 61).
2. Change to Modify mode (see “ Changing Between View Mode and Modify Mode ” on page 39).
3. In the Account Information tree, open the folder to which the user account for which you want to
change the password is registered.
4. In the Account Information tree, select the user ID of the user account for which you want to
change the password.
5. Right-click on the user ID, and then select the Change Password command.
The Change Password dialog box ( Figure 43 on page 86) is displayed.
6. In the Change Password dialog box, enter the password as follows.
• Current Password: Enter the current password. The current password is required when
Modify is not set for the Account Administrator Role of your user account.
• New Password: Enter the new password.
• Re-enter New Password: Enter the new password again for confirmation.
7. Click Set on the Change Password dialog box.
The Change Password dialog box is closed, and you return to the Account window.
8. Click Apply.
The settings are applied to the storage system.
Figure 43 The Change Password Dialog Box (when Modify is not set for Account
Administrator Role)
Changing User Operation Authority
To change the operation authority for the user account, log in with a user account for of which Modify is
set for the Account Administrator Role.
Note: To change the operation authority of a user account that is set to disable, you need to set the user
account to enable, change the operation authority of the user account, and then set the user account
to disable.
To change the operation authority of a user account:
1. Log in to Remote Web Console, and open the Account window (see Figure 28 on page 61).
2. Change to Modify mode (see “ Changing Between View Mode and Modify Mode ” on page 39).
3. In the Account Information tree, open the folder to which the user account for which you want to
change the operation authority is registered.
4. In the Account Information tree, select the user ID of the user account for which you want to
change the operation authority. In the User Information and Permission Information lists, the
operation authority of the selected user account is displayed.
5. Set the operation authority of the Account Administrator Role, Audit Log Administrator Role, and
Storage Administrator Role by selecting from each drop-down list.
6. Set the operation authority of each function in the Permission Information list if Enable is set
for the operation authority of the Storage Administrator Role.
To set the operation authority of each function:
86 Performing Remote Web Console Operations