HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 83)

Command line 83
Name RFC Description
are not otherwise counted.
Discontinuities in the value of this
counter can occur at re-initialization
of the management system, and at
other times as indicated by the value
of ifCounterDiscontinuityTime.
rfc2665_Dot3StatsInternalMa
cTransmitErrors
2665 A count of frames for which
transmission on a particular
interface fails due to an internal
MAC sublayer transmit error. A
frame is only counted by an instance
of this object if it is not counted by
the corresponding instance of either
the dot3StatsLateCollisions object,
the dot3StatsExcessiveCollisions
object, or the
dot3StatsCarrierSenseErrors object.
The precise meaning of the count
represented by an instance of this
object is implementation-specific. In
particular, an instance of this object
may represent a count of
transmission errors on a particular
interface that are not otherwise
counted. Discontinuities in the value
of this counter can occur at
re-initialization of the management
system, and at other times as
indicated by the value of
ifCounterDiscontinuityTime.
rfc2665_Dot3StatsLateCollisio
ns
2665 The number of times that a collision is
detected on a particular interface
later than one slotTime into the
transmission of a packet. A (late)
collision included in a count
represented by an instance of this
object is also considered as a
(generic) collision for purposes of
other collision-related statistics.
This counter does not increment when
the interface is operating in
full-duplex mode. Discontinuities in
the value of this counter can occur at
re-initialization of the management
system, and at other times as
indicated by the value of
ifCounterDiscontinuityTime.
rfc2665_Dot3StatsSQETTestEr
rors
2665 dot3StatsSQETestErrors - A count of
times that the SQE TEST ERROR
message is generated by the PLS
sublayer for a particular interface.
The SQE TEST ERROR is set in
accordance with the rules for
verification of the SQE detection