HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem User Manual
Page 21

Command line 21
Item
Description
->add enet-connection MyProfile Network=MyNetwork
SpeedType=Preferred
Adds a new Ethernet network connection and sets the speed to
"Preferred"
->add enet-connection MyProfile Network=MyNetwork
SpeedType=Custom Speed=2000
Adds a new Ethernet network connection and sets the speed to 2Gb
Item
Description
remove enet-connection
Remove the last Ethernet network connection from an existing server
profile.
Syntax
remove enet-connection
Parameter
ProfileName (required)
The name of the profile from which to remove the Ethernet connection.
Example
->remove enet-connection MyProfile
Removes an Ethernet network connection from a profile.
Item
Description
set enet-connection
Modify an Ethernet connection of a server profile.
Syntax
set enet-connection
[Network=
[PXE=
[SpeedType=
Parameters
ProfileName (required)
The name of the server profile that contains the connection to modify
Port (required)
The port number of the connection being modified
Properties
Network (optional)
The name of the Ethernet network to associate with the connection.
Applies to Ethernet network connections only. A blank string makes the
Ethernet connection unassigned.
PXE (optional)
Enables or disables PXE on a connection. Valid values are "enabled",
"disabled", and "UseBios". Applies to Ethernet network connections only.
PXE can be enabled on one connection per profile.
SpeedType (optional)
The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is determined by the
maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, it defaults to "Auto".
If the speed type is "Custom", the user can configure any speed from
100Mb to MAX configured speed for the network in 100Mb increments.
Speed (required if the
SpeedType is Custom)
The user-defined speed for the server port. Valid values include 100Mb to
MAX configured speed for the network in 100Mb increments.
Examples
->set enet-connection MyProfile 2
Network=NewNetworkName
Changes the associated network of an Ethernet connection
->set enet-connection RedProfile 1 Network=""
Sets a network connection to "Unassigned"
- Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem