HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 38)

Command line 38
Item Description
Syntax
show mac-cache
Example
->show mac-cache
Displays Ethernet MAC Cache failover settings
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network Create a new Ethernet Network. After the network has been created, uplink ports can
be added if the network is not using a shared uplink port set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it will be ignored. To configure the SmartLink attribute, use the set
network command.
Syntax
add network [-quiet] [UplinkSet=
VLanID=] [State=]
[NativeVLAN=] [Private=]
[ConnectionMode=]
[VLanTunnel=] [PrefSpeedType=]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The unique name of the new network to create
Option
Quiet Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
Properties
UplinkSet
(optional)
The name of an existing shared uplink port set to use with this new network. If this
property is specified, then a valid VLAN ID must also be provided. The limit is 32
networks per shared uplink set.
VLanID (optional) The VLAN ID associated with the network (used with shared uplink port set only). The
VLAN ID is a valid number between 1 and 4094.
State (optional) Enables or disables the network. Valid values are "Enabled" and "Disabled". The
default value is "Enabled".
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be specified only if
the network is a shared network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are "Enabled"
and "Disabled". The default value is "Disabled".
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through the
domain without any modification. If disabled, all tagged frames are discarded.
If multiple networks are configured on any server port, this option cannot be modified.
PrefSpeedType
(optional)
Default connection speed for any Ethernet connection attached to this network. Valid
values include "Auto" and "Custom". "Custom" enables the user to configure the