HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 62)

Command line 62
Item Description
configured as possible speeds. Speed restrictions apply.
Role (optional) The role played by the port if the connection mode of the network or shared uplink set
is selected as "Failover". The default value is "Primary".
Examples
->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
Changes the port speed of a network port
->set uplinkport enc0:2:1 Network=MyNetwork Speed=Disabled
Disables a specific port that belongs to a network
->set uplinkport enc0:2:4 UplinkSet=MyUplinkSet Speed=Disabled
Disables a specific port that belongs to a shared uplink set
->set uplinkport enc0:2:4 Network=MyNetwork Role=Secondary
Modifies the role of the network uplink port with the connection mode on the network or
the shared uplink set as "Failover" to take the primary port role
Item Description
show uplinkport Display all Ethernet module uplink ports known to the domain. If the port is a member
of a network or a shared uplink port set, then it appears also.
Syntax
show uplinkport [] [FilterBy]
Parameters
PortID (optional) The ID of an uplink port. The PortID format is
::. "*" displays a detailed view of all uplink
ports.
FilterBy
(optional)
Filters the output of the show command by the specified attribute. The option is
specified in the format =. For example, to display uplink ports
belonging to enclosure enc0, the option would be specified as ID=enc0. To display all
the ports using connector type RJ-45, the option would be Type=RJ45. You can
specify more than one filter option for a single command; for example, show
uplinkport ID=enc0 Type=RJ45.
Examples
->show uplinkport
Displays all uplink ports
->show uplinkport enc0:5:6
Displays details of uplink port 6 in bay 5 of the local enclosure
->show uplinkport *
Displays all uplink ports in the enclosure (detailed view)
->show uplinkport ID=enc0:1
Displays all the uplink ports for the specific bay (for example, for bay 1)
->show uplinkport status=Linked
Displays all the uplink ports that are linked
->show uplinkport ID=enc0:1 type=RJ45
Displays all the uplink ports for the specific bay 1 with connector type RJ-45
uplinkset
Manage shared uplink port sets
Supported actions: add, help, remove, set, show