HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 53)

Command line 53
Item Description
->show snmp FC
Displays SNMP configuration for VC-FC modules only
->show snmp
Displays SNMP configuration for all modules
snmp-trap
Manage SNMP trap information
Supported actions: add, help, remove, set, show, test
Item Description
add snmp-trap Adds a new SNMP trap destination.
Avoid using duplicate trap destinations. Setting duplicate trap destinations can
result in duplicate traps being sent to the same destination, or only one of the trap
destinations being configured.
Syntax
add snmp-trap Address=
[Community=
string>][Format=][Severity=
severity|All|None>][DomainCategories=
category|All|None>][EnetCategories=
category|All|None>][FcCategories=
category|All|None>]
Parameter
Name (required) A unique name for the new trap being added
Properties
Address (required) IPv4 address or DNS name for the trap destination
Community (optional) The SNMP community name string for the specified trap. The default value is
"public" if not specified. For VC-Enet modules, the maximum string length is 39. For
VC-FC modules, the maximum string length is 24.
Format Format of the new trap. Valid values are "SNMPv1" and "SNMPv2". The default is
"SNMPv1" if not specified.
Severities Trap severities to send to the destination. Valid values are "Normal", "Unknown",
"Info", "Warning", "Minor", "Major", "Critical", "All", and "None".
Multiple severities can be provided, separated by commas. The default severity is
"None".
DomainCategories The Virtual Connect Domain trap categories to send to the destination. Valid values
are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus", "ProfileStatus",
"ServerStatus", "EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.
EnetCategories The Virtual Connect Ethernet trap categories to send to the destination. Valid values
are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories The Virtual Connect Fibre Channel trap categories to send to the destination. Valid
values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->add snmp-trap EnetManagementStation Address=192.112.34.10
Community=private Format=SNMPv1 Severity=Normal,Critical
EnetCategories=Other
Adds a new trap destination for VC-Enet modules