HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 66)

Command line 66
user-security
Manage local user security settings.
Supported actions: help, set, show
Item Description
set user-security Modify domain user security settings and enforce additional security requirements
for user passwords.
Syntax
set user-security [StrongPasswords=]
[MinPasswordLength=<3-40>]
Properties
StrongPasswords
(optional)
Enables or disables strong password enforcement. If enabled, then new, local users
that are created are validated against the password characteristics specified. Valid
values include: "Enabled" and "Disabled".
MinPasswordLength
(optional)
The minimum password length allowed for new passwords when adding a new
user and when changing an existing password. The default value is 3.
Examples
->set user-security StrongPasswords=Enabled
Enables strong user password enforcement
->set user-security StrongPasswords=Disabled
Disables strong user password enforcement
->set user-security MinPasswordLength=10
Modifies the minimum password length
Item Description
show user-security Display general domain user security settings.
Syntax
show user-security
Example
->show user-security
Displays user security settings
vcm
Reset the Virtual Connect Manager.
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the standby VCM may also
be specified (optional), if there is a standby VCM available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity with
the Virtual Connect Manager. If failover is specified and there is a standby
VCM, users are logged off and must reconnect using the standby VCM IP
address.
Syntax
reset vcm [-failover]
Option
Failover Forces a failover from the current primary Virtual Connect Manager to the
standby manager
Examples