HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 35)

Command line 35
Item Description
Privileges (optional) A set of one or more privileges for the group. Valid values include any
combination of "domain", "server", "network", and "storage".
Example
->set ldap-group MyGroup Description="Test Group"
Privileges=domain,server,network
Modifies a directory group description and privileges
Item Description
show ldap-group Display the existing directory groups.
Syntax
show ldap-group [|*]
Parameter
GroupName (optional) The name of an existing LDAP group in the domain. If "*" is specified, then all
LDAP groups appear. The default behavior, if not specified, is to display a
summary of all groups.
Examples
->show ldap-group
Displays a summary listing of all LDAP groups
->show ldap-group MyGroup
Displays detailed information for a specific LDAP group
->show ldap-group *
Displays detailed information for all LDAP groups
log-target
Manage remote log destination settings.
Supported actions: add, help, remove, set, show, test
Item Description
add log-target Add a new remote log destination.
Syntax
add log-target
[Severity=]
[Transport=] [Port=<1-65535>]
[Security=] [Format=]
[State=]
Properties
Destination
(required)
The IpAddress or the DNS of the remote log destination that has been configured.
Severity (optional) Severity of the log messages that should be sent to the specified destination. Valid
values include "Critical", "Error", "Warning", and "Info". The default value is
"Info".
Transport (optional) The transport protocol to be used for sending the log messages to the destination.
Valid values include "TCP" and "UDP". The default value is "UDP".
Port (optional) The port to be used on the destination to send the log messages. Valid values
include 1 to 65536. The default value is 514.
Security (optional) Secure transmission of the log messages. Valid values include "None" and
"STunnel". The default value is "None", and no encryption is used during