HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 16)

Command line 16
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration and
resets it to the original defaults. After the domain has been deleted, you are logged
out and the Virtual Connect Manager resets.
Syntax
delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user confirmation
(primarily used in automated scripting scenarios)
Item Description
set domain Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=] [DomainIp=]
[IpAddress=] [SubnetMask=]
[Gateway=] [MacType=
User-Defined>] [MacPool=<1-64>] [MacStart=]
[MacEnd=] [WwnType=
Factory-Default | User-Defined>] [WwnPool=<1-64>]
[WwnStart=] [WwnEnd=]
[SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is 31 characters.
DomainIP (optional) Enables or disables the Virtual Connect domain IP address. If enabled, then a valid
IP address subnet mask must be configured. If disabled, then DHCP is used to obtain
a valid IP address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the Virtual Connect Manager. Use caution
when changing these settings. Valid values include "Enabled" and "Disabled".
IpAddress (optional) A valid IP address to use for the domain IP address configuration. The IP address
must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9.
Example: 192.168.0.10
SubnetMask (Required
if IP address
specified)
A valid subnet mask for the domain IP address configuration. The subnet mask must
be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9. Example:
255.255.255.0
Gateway (Required if
IP address
specified)
A valid gateway address for the domain IP address configuration. The gateway
address must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and
9. Example: 192.168.0.1
MacType (optional) The type of MAC address source to use for assignment. Valid values include
"VC-Defined", "Factory-Default", and "User-Defined".
MacPool (optional) The pre-defined MAC pool to use for address assignment. Valid values include
integers 1-64. This property is only valid if the MacType is set to "VC-Defined". If
not specified, the default pool ID is 1.