Figure 54 check iscsi names dialog box, Deleting host bus adapters from host groups, Deleting host bus adapters from iscsi targets – HP StorageWorks XP Remote Web Console Software User Manual
Page 91: 54 check iscsi names dialog box

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200
91
• The resulting iSCSI name exists in the port.
6.
Click OK. If a confirmation message appears, click OK. Changes appear in blue in the tree.
NOTE:
If you select Apply this change to other ports, too and click OK, a pane appears
) listing the host bus adapters to be changed. To make changes, click OK. If not, click
Cancel.
Figure 54
Check iSCSI names dialog box
7.
Click Apply. A confirmation message appears.
8.
Click OK. Changes are applied to the array.
Deleting host bus adapters from host groups
NOTE:
You cannot perform this operation on host groups for NAS ports.
1.
Start LUN Manager. The LUN Manager pane (
) appears.
2.
In the tree, right-click a host bus adapter (
), and select Delete WWN. A confirmation message
appears.
3.
Click Yes.
4.
Click Apply. A confirmation message appears.
5.
Click OK. Settings are applied to the array.
Deleting host bus adapters from iSCSI targets
NOTE:
You cannot perform this operation on host groups for NAS ports.
1.
Start LUN Manager. The LUN Manager pane (
) appears.
2.
In the tree, right-click a host bus adapter (
), and select Delete iSCSI Name. A confirmation message
appears.
3.
Click YES.
4.
Click Apply. A confirmation message appears.
5.
Click OK. Settings are applied to the array.