HP StorageWorks XP Remote Web Console Software - Manual (Page 147)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 147
Set LUSE Confirmation pane
When you right-click the free LDEVs you want to form the LUSE volume in the LDEV Information table, and
select Set LUSE Volume, the Set LUSE Confirmation pane appears. You can verify that the LDEVs listed in
the confirmation pane are the ones you want to create a LUSE volume.
Figure 88 Set LUSE Confirmation pane
• LUSE components list
Displays information about LDEVs that constitute the LUSE volume.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the HP StorageWorks External Storage XP user guide.
NOTE: If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume
(V-VOL). For more information about V-VOLs, see the HP StorageWorks Snapshot XP user guide.
• Emulation: LDEV’s emulation type.
• Capacity: LDEV’s capacity.
• OK: Creates the LUSE volume and sets the LUSE volume configuration to have LDEVs in the LUSE
components list. LDEVs registered as components of the LUSE volume appear in blue bold italics in the
LDEV Information table.
• Cancel: Cancels the operation to create a LUSE volume using LDEVs in the list.
Release LUSE Confirmation pane
When you select Release LUSE Volume, the Release LUSE Confirmation pane appears. You can verify that
the LUSE volumes listed in the confirmation pane are the ones you want released.