Ethernet leds, Figure 2 ethernet leds, System leds – HP Storage EVA Capacity Upgrades User Manual
Page 8: Figure 3 system leds
8
Switch Installation
Ethernet LEDs
The Ethernet LEDs indicate the network connection status:
System LEDs
The System LEDs indicate the switch’s status, independent of the port LEDs.
FAULT
POWER
TEMP
10101
1
2
3
4
5
6
7
8
9
10
11
12
100-240 V~, 50/60 H
Z
Figure 1
Switch View Depicting Ethernet, Port, and System LEDs
Port LED
Ethernet LEDs
System LEDs
Ethernet LEDs
Indication
Ethernet Activity
(green LED)
• When flashing, the Ethernet port is receiving data.
• When flashing rapidly, the traffic level is high.
Ethernet Link
(green LED)
When lit, the switch is connected to an operational Ethernet.
Figure 2
Ethernet LEDs
Ethernet Activity
Ethernet Link
System LEDs
Indication
Power
(green LED)
When lit, the switch is plugged in and the internal power supply is functional.
Fault
(yellow LED)
When lit, an event has occurred that meets or exceeds the current Fault LED threshold
setting. The default Fault LED threshold setting is “critical”. For more information on the
Fault LED threshold setting, see
“Setting the Fault LED Threshold” on page 24
For a
complete list of event messages and severity levels, see
.
Note: The switch will continue to operate. Switch functionality may be impaired depending
on the event that triggered the Fault LED. Regardless of the cause, the switch requires
immediate attention.
Temp
(yellow LED)
When lit, the internal temperature has exceeded acceptable levels.
Note: The switch will continue to operate. Switch functionality may be impaired depending
on the event that triggered the Temp LED. Regardless of the cause, the switch requires
immediate attention.
Figure 3
System LEDs