HP Storage EVA Capacity Upgrades - Manual (Page 27)

30-10022-01 loop switch user guide 27
Viewing Port Information
The Port Information page displays the ports, their current health, the AL_PAs currently assigned to
each port, and the utilization for each port.
Port utilization measures the amount of traffic passing through a port over a period of time. For
example, if an initiator is transmitting data to a target, the initiator port displays a transmit (Tx) port
utilization value (%) while the target port displays a receive (Rx) port utilization value. If the same
initiator is receiving data from the target, the target port displays an Rx port utilization value (%) while
the initiator port displays a Tx port utilization value.
The Port Information page displays each port’s Rx and Tx utilization percentage based on low,
average, and high utilization.
To view port information, click Port Information.
The Port Information page is displayed.
Value Description
Low The lowest percentage of data communication through a port in the last 10 seconds.
Average The average percentage of data communication through a port in the last 10 seconds.
High The highest percentage of data communication through a port in the last 10 seconds.
Figure 11 Port Information page