HP Virtual Connect Enterprise Manager Software - Manual (Page 94)

•
Exclusion_range_WWN_1 is equal to 50:01:43:80:02:A3:00:00 to
50:01:43:80:02:A3:AA:A9
•
Exclusion_range_WWN_2 is equal to 50:01:43:80:02:A4:55:54 to 50:01:43:80:02:A4:FF:FF
For CMS #3, create one MAC and one WWN exclusion range for other VCEM-Defined addresses
in use:
•
MAC_Exclusion_Range is equal to 00-21-54-9B-00-00 to 00-21-54-9C-55-53
•
WWN_Exclusion_Range is equal to 50:01:43:80:02:A3:00:00 to 50:01:43:80:02:A4:55:53
Deleting WWN exclusion ranges
1. From the VCEM home page, under the Administration heading, click the World Wide Names
hyperlink.
2. From the Select ranges to configure list, select WWN.
3. Select a WWN address range. The exclusion range must be contained within the address
range to which the exclusion range belongs.
IMPORTANT: After upgrading to VCEM 1.4x or later, HP recommends that you delete any
exclusion ranges for HP predefined MAC and WWN addresses.
4. Click Delete. You are prompted to confirm your choice.
IMPORTANT: If the exclusion range includes external addresses, these external addresses
remain external, even if the exclusion range is removed.
To avoid conflicts, ensure all addresses within this range are not being used by any other
Fibre Channel device on your network.
Allocating WWN addresses
Exclusion ranges are used to set aside addresses that might be in use for other purposes within
your data center. Excluded address ranges are not assigned for use by VCEM.
To allocate WWN addresses:
1.
From the VCEM home page, under the Administration heading, click the World Wide Names
hyperlink.
2. From the Select ranges to configure list, select WWN. The WWN Ranges List page appears.
94 Managing MAC and WWN addresses