HP Virtual Connect Enterprise Manager Software - Manual (Page 29)

Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of
the VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
NOTE:
Keep the following in mind:
•
VC 3.0x features must be disabled in order for the firmware to reside in the same groups as
VC 2.3x or 2.1x firmware versions.
•
All Virtual Connect 2.3x features not supported by VC firmware 2.1x must be disabled.
•
Multi-blade FC servers are not supported.
Do not configure server profiles assigned to multi-blade servers with more FC SAN connections
than the number of Virtual Connect Fibre Channel modules available in the VC Domain. The
additional FC SAN Connections Connected To column displays duplicate bays as shown in
the following figure:
Figure 11 Server Profile configured with a FC multi-blade server
To disable this feature:
1.
Log on to HP Virtual Connect Manager.
2. Expand Server Profiles in the navigation pane and select the server profile with the
additional FC SAN Connections that you want to delete.
3. Right-click and select Delete Connection.
•
More than 32 Ethernet network connections in a server profile is not supported.
To disable this feature:
1.
Log on to HP Virtual Connect Manager.
2. Expand Server Profiles in the navigation pane and select the server profile with more
than 32 Ethernet network connections.
Requirements for adding a VC Domain to a VC Domain Group 29