HP Virtual Connect Enterprise Manager Software - Manual (Page 70)

5. (Optional) You can create vNet mappings based on a Shared Uplink Set. To perform this task,
select Force same VLAN mappings as Shared Uplink Sets.
Figure 30 Force same VLAN mappings as Shared Uplink Sets check box
Configuring Network Port Speed
When creating or editing a server profile, you can configure the network speed of an Ethernet
network connection. You can select network speeds of 1Gb, 2Gb, 4Gb, and 8Gb, or Auto.
1.
In the Ethernet connections table, select the desired port speed from the Port Speed Setting
menu.
2. (Optional) To select the desired port speed for the connection, select Custom. The Custom Port
Speed windows appears. Enter the desired port speed.
Figure 31 Custom Port Speed window
Deleting a server profile
VCEM detects the presence of logical server managers or upper level managers. When performing
this task, a prompt dialog message appears and explains the impact of performing that task from
outside the logical server manager or upper level manager. The following message appears:
IMPORTANT: VCEM has detected you may be using other products, such as
HP Insight Dynamics – VSE. Deleting this VC Domain Group will make it
and any Server Profiles in this VC Domain Group unmanageable by this
upper level manager. Type YES to proceed with this operation.
To proceed, you must type YES, and then click OK. VCEM does not proceed if you cut and paste
YES into the field.
1.
From the Server Profiles page, select the server profiles to be deleted.
2. Click Delete. You are prompted to confirm the deletion.
3. Click OK to go to the Jobs page and monitor job progress.
70 Managing server profiles