HP Identity Driven Manager Software Licenses - Manual (Page 149)

4-13
Using the Secure Access Wizard
Using Secure Access Wizard
Max retries - Set number of times a client can enter their credentials
before authentication is considered to have failed (default 3). Valid
values are 1 - 10.
Server timeout
- The authentication server response timeout (default
30 sec). Valid values are 1-300.
Max requests
- The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value is 2.
SSL login - Set whether to allow SSL login (https on port 443). This is
disabled (No) by default.
Allow client moves - Set whether to allow client moves between ports.
The default is disabled (No).
If a device does not support the selected setting, the value you set will
appear in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.