HP Identity Driven Manager Software Licenses - Manual (Page 144)

4-8
Using the Secure Access Wizard
Using Secure Access Wizard
11. Click Next to continue to the authentication configuration window:
• For 802.1X, go to step 12 (below).
• For Web-Auth, go to step 13.
• For MAC-Auth, go to step 14.
12. The 802.1X configuration window lets you select the authentication
method to be applied in the secure access settings for the selected devices.
Figure 4-6. Secure Access Wizard, 802.1X Configuration display
The configuration options displayed will vary based on the selected device
set: wired, wireless, or both.
a. Click the radio buttons to select the authentication method for the
selected device types. Only one method can be applied.
For Wired devices the 802.1X authentication options are:
– Use EAP-capable RADIUS
– Use CHAP (MD5)-capable RADIUS
For Wireless devices the 802.1X authentication options are:
– WPA - TKIP
– WPA2 - TKIP
– WPA2 - CCMP (AES)
– WPA2 - Mixed mode AES-TKIP