HP Identity Driven Manager Software Licenses - Manual (Page 147)

4-11
Using the Secure Access Wizard
Using Secure Access Wizard
13. The Web-Auth Configuration window lets you select the RADIUS authen-
tication method to be applied in the secure access settings for Wireless
Services Modules (2.x or higher).
Figure 4-8. Secure Access Wizard, Web-Auth Configuration
a. Click the radio button to select the RADIUS authentication protocol.
Only one method can be applied, either:
–
Use PAP-capable RADIUS server for Web-Auth
– Use CHAP-capable RADIUS server for Web-Auth
b. Click the Advanced Settings for Wired Web-Auth to configure the
advanced settings for Web-Auth on wired devices. (see figure 4-9 on
the next page)
c. Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the Reset to default values option is
enabled. Click the link to restore the advanced settings for wired Web-
Auth defaults.