HP Smart Update Manager (User Guide) - Manual (Page 50)

Possible values Description Parameter
HPVCAVCRMLOGIN parameter.
(Applies to Linux PSP only.)
YES , NO (default) HP Systems Management Homepage
(hpsmh) uses this parameter to force FORCE-OVERWRITE
overwrite the SMH settings of an
existing configuration file.
Up to five Linux groups, separated
by spaces or semicolons, to enable HP Systems Management Homepage
(hpsmh) uses this parameter to set up ADMIN-GROUP
administrative access to the web
services. security for the web server. (Applies
to Linux PSP only.)
Up to five Linux groups, separated
by spaces or semicolons, to enable HP Systems Management Homepage
uses this parameter to set up security USER-GROUP
user-level access to the web
servers. for the web server. (Applies to Linux
PSP only.)
Up to five Linux groups, separated
by spaces or semicolons, to enable HP Systems Management Homepage
uses this parameter to set up security OPERATOR-GROUP
operator-level access to the web
servers. for the web server. (Applies to Linux
PSP only.)
YES , NO (default) Determines whether an anonymous
user can access HP Systems ANONYMOUS-ACCESS
Management Homepage. (Applies to
Linux PSP only.)
YES , NO (default) HP Systems Management Homepage
uses this parameter to determine IP-BINDING
whether HP SMH can use all available
NICs and detect subnets for its web
services. (Applies to Linux PSP only.)
IP address pairs separated by
semicolons (for example,
10.1.1.1/255.255.255.0; HP Systems Management Homepage
uses this parameter to restrict the NICs
and subnets to use for its web servers.
The IP-BINDING parameter must be
set to yes for this parameter to be
IP-BINDING-LIST
10.2.2.2/255.255.255.0)
used during installation. (Applies to
Linux PSP only.)
YES , NO (default) HP Systems Management Homepage
uses this parameter to restrict login
access. (Applies to Linux PSP only.) IP-RESTRICTED-LOGINS
To enable restrictions on who can
log in to the web server, this
parameter must be set to yes, and
values must be provided to the
IP-RESTRICTED-EXCLUDE
or
IP-RESTRICTED-INCLUDE
parameters.
List of IP address ranges separated
by semicolons (for example,
10.1.1.1-10.1.1.10; HP Systems Management Homepage
uses this parameter to exclude specific
IP address/netmask pairs from logging
into the web services. (Applies to Linux
PSP only.) IP-RESTRICTED-EXCLUDE
10.2.2.2-10.2.2.10)
This parameter is ignored unless the
IP-RESTRICTED-LOGINS
parameter
is set to yes.
List of IP address ranges separated
by semicolons (for example,
10.1.1.1-10.1.1.10; HP Systems Management Homepage
uses this parameter to enable login
only from the IP address/NetMask
pairs specified. (Applies to Linux PSP
only.) IP-RESTRICTED-INCLUDE
10.2.2.2-10.2.2.10)
50 Using scripts to deploy updates