HP Smart Update Manager (User Guide) - Manual (Page 32)

The following table shows what updates occur if no switches are currently installed.
Gen8 servers G7 and earlier servers Command
AMS SNMP no switches
Nothing Nothing /no_mgmt
AMS Nothing /use_ams
SNMP SNMP /use_snmp
WBEM WBEM /use_wmi
AMS and SNMP SNMP /use_ams /use_snmp
AMS and WBEM WBEM /use_ams /use_wmi
WBEM and SNMP WBEM and SNMP /use_wmi /use_snmp
AMS, SNMP and WBEM WBEM and SNMP /use_ams /use_wmi /use_snmp
The following table shows what updates occur if SNMP switches are currently installed.
Gen8 servers G7 and earlier servers Command
SNMP SNMP no switches
SNMP and AMS SNMP /use_ams
SNMP SNMP /use_snmp
WBEM and SNMP WBEM and SNMP /use_wmi
AMS and SNMP SNMP /use_ams /use_snmp
AMS, SNMP, and WBEM WBEM and SNMP /use_ams /use_wmi
WBEM and SNMP WBEM and SNMP /use_wmi /use_snmp
AMS, SNMP, and WBEM WBEM and SNMP /use_ams /use_wmi /use_snmp
The following table shows what updates occur if WBEM switches are currently installed.
Gen8 servers G7 and earlier servers Command
WBEM WBEM no switches
WBEM and AMS WBEM /use_ams
WBEM and SNMP WBEM and SNMP /use_snmp
WBEM WBEM /use_wmi
AMS, SNMP, and WBEM WBEM and SNMP /use_ams /use_snmp
WBEM and AMS WBEM /use_ams /use_wmi
WBEM and SNMP WBEM and SNMP /use_wmi /use_snmp
AMS, SNMP, and WBEM WBEM and SNMP /use_ams /use_wmi /use_snmp
32 Using scripts to deploy updates